IN.YE control systems are designed to Retrofit perfectly and to be easily installed, powered and connected to pumps and accessories of spas of all sizes and configurations.

Excellent replacement for Gecko S-CLASS & M-CLASS systems as well as Balboa VS & BP systems.

Specifications:

• Voltage: 115v / 230v Single Phase
• Heater KW Rating: 5.5kw
• Heater Dimensions: 15" (Steel Flange to Steel Flange) 2" OD
• Control Box Dimensions: 18" Width x 10.75" Height x 4.98" Depth
• Can Support Up To 5 Relays
• In.touch 3 Wi-Fi Connectivity Included
• Bundled System Includes The Following:
• Spa Pack: in.ye-5 V3
• in.touch 3: Wi-Fi Connectivity Device ( 0608-521047 )
• Keypad: in.K450-3OP ( 0607-005012 )
• Heater: heat.wav ( 9920-101449 )
• Keypad Adapter Plate: K450 Adapter (9917-102123)
• Equipment Cables: (2) Dual Speed AMP Cables ( 95100519 ), (2) Single Speed AMP Cables ( 95100517 ), Light Cables ( 9920-400489 & 9920-401507 )

Can Replace the Following Control System Models:

• Gecko XE Class
• Gecko S-Class (Does Not Apply To Spas With Low Flow Configurations)
• Gecko M-Class (Does Not Apply To Spas With Low Flow Configurations)
• Balboa VS Systems
• Balboa BP Systems
• Balboa BP7 Retrofit System
• Gecko Y Class Version 1 & 2 Systems

Note:

• This Control Box Supports Up To 5 Relays
• Each Pump Speed Uses a Relay, Each Piece of Equipment Uses a Relay.
• For Example: A Dual Speed Pump and a Single Speed Air Blower = 3 Relays.
• 12v Lights Do NOT Use Any of the 5 Available Relays.

Product Features:

• Upgraded Memory
• Higher Capacity Relays
• LED Troubleshooting Lights
• Faster Communication With Accessories
• This system supports keypads, heater, a 12v light, as well as 5 configurable relays.
• Solid State water flow detection (no pressure switch)
• IPX5 rated waterproof enclosure
• Preloaded configurations allow fast and easy installation.
• Convertible to accept either 115v / 230v incoming electrical (Requires a Neutral For 115v Installations)
• Each output can be configured 115v / 230v.
• AMP style connectors for quick secure connections.
• Powerful 5.5kw flow through style heater (Requires minimum of 20 GPM)
• Many compatible keypads
• Temperature probe is built into the heater.
• Kinetic heat, overheat, and anit-freeze protections.
• Self diagnostic functions
• Programmable filter cycles.
• Corrosion free enclosure 

• Spa pack:IN.YE-5 V3 Controller with 5.5KW Flo-thru Heater (9920-101449)
  
• Keypad: in.k450-3OP
  
• Cables: 2 x dual spd AMP cable (95100519) & 2 x single spd AMP cable (95100517) & Light (9920-400489 & 9920-401507 )
  
• Adaptor plate (9917-102123)
  
• Spa Pack: in.ye-5 V3